Ayre DPS Owner's Manual download pdf (Page 17)

If overheating occurs, be sure

to correct the cause before

continuing to use the 3-Phase

Power Supply.

Once the unit has cooled the unit will revert to the

green “Standby” condition. To restore the unit to

the blue “Operate” mode, simply press the front

panel button.

Status LED Summary

Red Warmup / Brownout – The low-distortion

oscillator is stabilizing after the unit is first powered

on. The indicator will also glow red if the AC line

voltage drops below about 80% of normal.

Green Standby – The power supply is ready to enter

“Operate” mode.

Blue Operate (33-

/3 rpm) – The turntable is running at

33-

/3 rpm.

Violet Operate (45 rpm) – The turntable is running at 45

rpm.

Orange Over Temperature – The motor-drive amplifiers

has exceeded their safe operating temperatures due

to poor ventilation. The unit will automatically

revert to “Standby” (green) when it has cooled. Be

sure to correct the problem before continuing to use

the power supply.

Flashing Violet Configuration Mode – The unit has been placed

into the “Configuration Mode”. Please refer to the

chapter “Optimization and Customization” for

additional details. It will automatically revert to

“Standby” (green) after ten seconds.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Ayre DPS Owner's Manual Page 17